PGA

PGA SERIES: 100-PGA/ 150-PGA and 200-PGA Electric Plastic Remote Control Valves

Features

  • Globe and angle configuration for flexibility in design and installation
  • PVC and glass rein forced nylon construction
  • Filtered pilot flow to resist debris and clogging of solenoid ports
  • Slow closing to prevent water hammer and subsequent system damage
  • Manual internal bleed operates the valve without allowing water into the valve box
  • One-piece solenoid design with captured plunger and spring for easy servicing.Prevents loss of parts during field service
  • Non-rising flow control handle adjusts water flows as needed
  • Normally closed,forward flow design

Specifications

  • Pressure:1.04to10.35bar
  • Flow: 0.45 to 34.05 m3/h
  • Flow with PRS-D:1.14to34.05m3/h
  • Water Temperature:upto43°C
  • Ambient Temperature:upto52°C

ELECTRICAL SPECIFICATIONS

  • Power:24VAC50/60Hz(cycles/sec)solenoid
  • Inrush current:0.41A(9.84VA)at60Hz
  • Holding current:0.28A(6.72VA)at60Hz
  • Coil resistance:30-39Ohms

DIMENSIONS Height x Length x Width
100-PGA : 18,4 cm x 14,0 cm x 8,3 cm
150-PGA : 20,3 cm x 17,2 cm x 8,9 cm
200-PGA : 25,4 cm x 19,7 cm x 12,7 cm

TEMPERATURE RATING


Valve Pressure loss (bars)

Pressure loss values are with flow control fully open.